Anyone done a DIY fork seal replacement? Mine are oozing pretty good. Got the seal kit and new bushings just in case. Any tips? Ideas for stands that won't break the bank?
When I change the fork seals I jack the front of the bike up using a car jack on the downpipes. It rotates on the centre stand. Once it is high enough to allow the front wheel removal it is then possible to remove the forks themselves. If you dont have a Center stand things might be a little tricky.
You can see how I did it in this thread: https://www.zzrrider.com/post/2018/01/02/fitting-the-hyperpro
When I change the fork seals I jack the front of the bike up using a car jack on the downpipes. It rotates on the centre stand. Once it is high enough to allow the front wheel removal it is then possible to remove the forks themselves. If you dont have a Center stand things might be a little tricky.