Tyre Fiasco!
I have been waiting 4 weeks for Bridgestone to supply a set of tyres but still nothing. In the end I cancelled the order and Have fitted...
top of page
Kawasaki ZZR 1100 & ZX14R
Riding Legends
Search
Kawasaki Rider
- Apr 9, 2018
- 1 min
Makes me Cry!!
I saw this ZZR recently. It was a standard ZZR and the owner took it to a "mechanic" to modernise it. So the mechanic junked the...
29 views0 comments
Kawasaki Rider
- Apr 9, 2018
- 1 min
The Figures!
Kawasaki ZZR 1100 Engine and transmission Displacement:1052.00 ccm (64.19 cubic inches) Engine type:In-line four, four-stroke...
14 views0 comments
Kawasaki Rider
- Apr 9, 2018
- 2 min
ZZR History Thanks to "The Kawasaki ZX-11 / ZX-12R Ninja Repository"
History of the ZZ-R/ZX C- and D-models In 1990 Kawasaki introduced the ZZ-R 1100 / ZX-11 Ninja. It shook the world. A bike that fast,...
171 views0 comments
Kawasaki Rider
- Apr 9, 2018
- 1 min
Changing a disk
I have always realised that there was a slight warp on one of the disks. It was not bad but it was annoying. Well I finally replaced the...
6 views0 comments
Kawasaki Rider
- Apr 9, 2018
- 1 min
Its going Great!
So while I am waiting for the tyres a chance to fill you in on how its running. Ever since I found the great mechanic the bike has been...
5 views0 comments
Kawasaki Rider
- Apr 9, 2018
- 1 min
Tyres, oh how I wish!!
So having experienced two punctures in quick succession I decided to change the tyres. I have had Pirelli Angel GT's fitted and whilst...
5 views0 comments
Kawasaki Rider
- Apr 9, 2018
- 1 min
Alternator Nightmare
Well finally got to the bottom of the charging issues. After much messing around it was found that alternator was dead. Trying to source...
3 views0 comments
Kawasaki Rider
- Jan 2, 2018
- 1 min
Some of the carb issues
These were the last bit I changed on the carbs. The floats were leaking and the rubber had holes in.
2 views0 comments
Kawasaki Rider
- Jan 2, 2018
- 1 min
Extra things I have spent money on.
In addition to the parts needed to get it running properly I have also spent a good deal of money on bits and pieces. I ordered and...
7 views0 comments
Kawasaki Rider
- Jan 2, 2018
- 3 min
Why is it the best!
Although I have ridden many of the modern sports bike, and they are impressive machines, I find them a little, how can I say this,...
12 views0 comments
Kawasaki Rider
- Jan 2, 2018
- 1 min
The starting button drama!
One day, when out for a ride when I released the starting switch if flew out and I was stuck not being able to start it unless I pushed...
8 views0 comments
Kawasaki Rider
- Jan 2, 2018
- 1 min
Other bits and Pieces
I have aquired a complete fairing set that has been painted the same as original. This also includes 2 spare mirrors, spare forks and...
5 views0 comments
Kawasaki Rider
- Jan 2, 2018
- 1 min
Dam, an old problem has returned.
Riding back home today and I stopped to get some items from a shop. When I went to start the bike it did not have enough power to start....
5 views0 comments
Kawasaki Rider
- Jan 1, 2018
- 1 min
What I have purchased for this bike.
The following is a list of the parts I have purchased for this bike over the last couple of years. I will explain some of these things in...
10 views0 comments
Kawasaki Rider
- Jan 1, 2018
- 1 min
A new bike!!
After I picked up the bike and ran it in the difference was amazing. It no longer smoked, oil consumption is nothing, the bikes runs and...
5 views0 comments
Kawasaki Rider
- Jan 1, 2018
- 1 min
The real reason for all the issues.
A few weeks later I got a report on the problems with my bike. 1. The valve stem seal were leaking (yes the ones I had had fitted less...
10 views0 comments
Kawasaki Rider
- Jan 1, 2018
- 1 min
Still got carb problems and also oil burning!
The bike was not running at all well and as far as I was concerned something major was wrong. I had lost faith with the mechanic and in...
4 views0 comments
Kawasaki Rider
- Jan 1, 2018
- 1 min
It was the dam valves!!
I went to the mechanics shop to get some small thing done, balance the carbs if my memory serves me right and I asked him about the...
6 views0 comments
bottom of page